‍General Notes

• "Option" column specifies the configuration code required to have the particular feature.
• "+" means that the feature is always available.

CPU Core

• CPU: NXP i.MX8M Plus QuadLite, quad-core ARM Cortex-A53, 1.8GHz
• C1800Q: NXP i.MX8M Plus Quad, quad-core ARM Cortex-A53, 1.8GHz
• C1800QM: AI/ML Neural Processing Unit, up to 2.3 TOPS
• C1800QM: Real-Time Co-processor, ARM Cortex-M7, 800MHz

Memory and Storage

• RAM: 1GB – 8GB, LPDDR4
• Primary Storage (D): 16GB – 128GB eMMC flash, soldered on-board
• Secondary Storage (FXN): 16GB – 128GB eMMC flash, optional add-on module

Display and Graphics

• Display Output: DVI-D, up to 1080p60
• GPU: GC7000UL GPU
• Video: 1080p60 HEVC/H.265, AVC/H.264

Network

• LAN: 2x 1000Mbps Ethernet ports, RJ45 connectors
• WiFi and Bluetooth (WB): 802.11ax WiFi and Bluetooth 5.3 BLE, implemented with Intel WiFi 6E AX210 module, 2x 2.4GHz / 5GHz rubber duck antennas
• Wireless Mesh (WM): Bluetooth mesh, Thread, Zigbee, implemented with Nordic Semiconductor nRF52840 module, 2.4GHz rubber duck antenna
• Cellular (JEC25E): 4G/LTE CAT4 cellular module, Quectel EC25-E (EU bands)
• Cellular (JEC25A): 4G/LTE CAT4 cellular module, Quectel EC25-A (US bands)
• Cellular (JEG25G): 4G/LTE CAT4 cellular module, Quectel EG25-G (Global bands)
• SIM card socket: Included
• Cellular Antenna: Included with JEC25x or JEG25G
• GNSS: GPS implemented with Quectel EC25 module

I/O

• USB: 2x USB2.0 ports (type-A, back panel), 1x USB3.0 port (type-A, front panel)
• RS485 / RS232 (FxRS4 / FxRS2): Up to 3x RS485 (half-duplex) | RS232 ports, isolated, terminal-block connector
• CAN Bus: 1x CAN bus port (isolated, terminal-block connector)
• Additional CAN (FCCAN): 1x CAN bus port (isolated, terminal-block connector)
• Digital I/O (FDIO): 4x digital outputs + 4x digital inputs, isolated, 24V compliant with EN 61131-2, terminal-block connector
• Analog Input (FXADC): 4x analog inputs, 0...10V / 4…20mA, isolated, terminal block connector
• Debug: 1x serial console via UART-to-USB bridge, micro-USB connector
• Debug: Support for NXP SDP/UUU protocol, micro-USB connector
• Expansion Connector: For add-on boards; LVDS, SDIO, USB, SPI, I2C, GPIOs (not FXxx)

System

• RTC: Real time clock operated from on-board coin-cell battery
• Watchdog: Hardware watchdog
• Security: Secure boot (i.MX8M Plus HAB module)
• TPM (FXTPM): TPM 2.0, Infineon SLB9670 (implemented with add-on board in expansion connector)
• LEDs: 2x general purpose LEDs
• PoE: Support for PoE (powered device)

Electrical Specifications

• Power Supply: DC input: unregulated 8V to 36V, reverse voltage protection
• Power Consumption: 2.5W – 8W, depending on system load and configuration

Mechanical Specifications

• Dimensions: 132 x 84 x 25 mm
• Enclosure Material: Aluminum housing
• Cooling: Passive cooling, fanless design
• Weight: 550 grams

Compliance

• Regulatory: FCC, CE, UKCA
• EMC: EN 55032/5, EN 61000-6-2, EN 61000-6-3
• Safety: EN/UL/IEC 62368-1

Reliability and Environmental

• MTTF: > 200,000 hours
• Warranty: 5 years
• Operation Temperature: Commercial: 0° to 60° C / Industrial: -40° to 80° C
• Storage Temperature: -40° to 85° C
• Relative Humidity: 10% to 90% (operation) / 05% to 95% (storage)